AMF
X
group picture
group picture

Clamping Head, complete with base

single acting, with spring return,
max. operating pressure 400 bar.

Order
no.		 Article no. Clamping force
at 400 bar
[kN] 		Stroke H
[mm] 		Vol.
[cm³] 		Spring force min.
[N] 		Weight
[g] 		CAD SC
61184 6945-11-20x14x30 20 6 2,9 120 1471
61416 6945-11-20x18x30 20 6 2,9 120 1581
61192 6945-11-32x18x30 32 8 6,4 260 2855
61424 6945-11-32x22x30 32 8 6,4 260 3095
61200 6945-11-63x22x30 63 10 16,0 580 4660
61432 6945-11-63x28x30 63 10 16,0 580 5080
64006 6945-11-94x28x50 94 12 28,5 920 10380

Design:

Cylinder body made of tempering steel, blued. Piston case-hardened and ground. Built-in return spring, complete with locating pin.

Application:

The clamping head is used to clamp press tools on the press table and ram. The unit is inserted into the T-slot and moved above the clamping spot at the tool to be clamped. The clamping heads of size 20-63kN are suitable for a clamping height of 29 mm. Size 94kN suits a clamping height of 50 mm. To adjust other clamping heights, spacer plates of 10 mm and 20 mm are available.

Features:

Small dimensions. The hydraulic oil supply can be connected to any of the three sides.

Note:

If a clamping head is retrofitted with an spacer plate, the locating pin must be removed from the lower part of clamping head. T-Slot dimension F has to be considered urgently.

  • dimensions table
    Order
    no.     		Article no. A B C D F H K L M W
    61184 6945-11-20x14x30 14 50 40 41,0 15 6 95,0 80 40 31
    61416 6945-11-20x18x30 18 50 40 41,0 20 6 102,0 80 40 31
    61192 6945-11-32x18x30 18 60 50 53,0 20 8 114,0 100 50 31
    61424 6945-11-32x22x30 22 60 50 53,0 25 8 123,0 100 50 31
    61200 6945-11-63x22x30 22 70 60 63,0 25 10 133,0 120 60 31
    61432 6945-11-63x28x30 28 70 60 63,0 30 10 142,0 120 60 31
    64006 6945-11-94x28x50 28 90 80x70 79,5 34 12 187,5 150 80 55


Matching accessories and similar products

Holder for Clamping Head

No. 6945-11