AMF
X
group picture
group picture

Hollow Rod Cylinder with internal thread

Double-acting,
max. operating pressure 350 bar.

Order
no.
Article no. push-pull force
VH 100 bar
[kN]
push-pull force
VH 350 bar
[kN]
push-pull force
RH at 100 bar
[kN]
push-pull force
RH at 350 bar
[kN]
Stoke B
[mm]
Vol.
[cm³]
effective piston area
[cm²]
Weight
[g]
CAD SC
67918 6935D-20 5,8 20,6 5,8 20,6 6,5 3,8 5,9 572
67934 6935D-30 8,4 29,7 8,4 29,7 9,5 8,1 8,5 940
67959 6935D-53 15,2 53,2 15,2 53,2 12,5 19,3 15,2 1837

VH = work stroke, RH = back stroke

Design:

Cylinder barrel from steel, hardened and burnished. Piston and piston rod case hardened and ground. Piston rod with through-hole and internal thread. Wiper at piston rod. Return spring from stainless steel. Oil supply via threaded port.

Application:

Particularely suitable to retrofit existing mechanical fixtures for hydraulic actuation. The hollow cylinder can be operated as push or pull cylinder. Universal cylinder for clamping, pushing, locking and punching.

Features:

Clamping cylinder with tapped piston rod. Tapped piston rod ends allow the use of custom end attachments.

Note:

For single acting cylinders there is the risk of succing in coolant through the breather port. Therefore, the sinter metal breather has to be protected e.g. by cover plates from direct access of coolant. The system has to be completely vented thoroughly during installation.

  • dimensions table
    Order
    no.
    Article no. A C D E F G H J x depth
    dia. K
    L M N P dia. Q dia. S
    67918 6935D-20 51,0 7,0 43,5 41,5 32 M10 28,5 M6x6 10,5 12 20,5 15 55 16,0 39,5
    67934 6935D-30 63,5 7,0 56,5 49,5 36 M12 24,5 M8x8 13,5 18 25,5 15 62 19,0 47,5
    67959 6935D-53 76,0 9,5 66,0 64,5 50 M16 25,0 M10x13 16,5 23 30,0 18 76 25,5 63,5