AMF
X
group picture
group picture

ESD vertical toggle clamp

With protective cap and handle made of electrostatic conductive (dissipative) material.
With open clamping arm and horizontal base.
Galvanised and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearing positions are greased.
Ergonomic, oil-resistant handle with large grip surface and soft components. Safety clamping piece with finger protection, retainer for the clamping screw at the end of the clamping arm.
Complete with tempered, galvanised clamping screw No. 6890ESD.

Order
no.
Size F1
[kN]
F2
[kN]
Clamping
screw
Weight
[g]
CAD EUR SC
562483 0 0,5 0,7 M4 x 25 60 23,60
562484 1 0,6 1,1 M5 x 30 105 24,90
562486 2 0,8 1,2 M6 x 35 175 30,80
562487 3 1,2 2,5 M8 x 45 410 35,10

Application:

The ESD toggle clamp has been specially developed for use in ESD protection zones (EPA – electrostatic protected area) for working on electrostatically sensitive components, assemblies or devices in accordance with the standard DIN EN 61340-5-1.

Features:

- Leakage resistance according to DIN IEC/TR 61340-5-2 between 10⁰⁴ and 10⁰⁹ Ohm
- Discharge time according to DIN IEC/TR 61340-5-2 < 2 Sekunden
- Surface tension (electric field strength) according to DIN EN 61340-5-1 < 100 Volt

Note:

The ESD vertical toggle clamp is non-insulating. It must not be used in areas where open voltages are used.
For further technical information please request the data sheet.

  • dimensions table
    Order
    no.
    Size A B C D E F H H1 HW min. HW max. I K L L1 L2 M M1 N P α α*
    562483 0 4 31 8,5 - 13,5 4,5 14 5,0 18 81 -1,5 3,5 8 5,5 - 49 50 23,0 - 32 22 95° -
    562484 1 5 39 16,0 4,5 18 6,0 19 98 -4,0 2,0 10 5,5 - 61 58 22,5 - 26,0 - 34 27 95° -
    562486 2 6 52 20,0 5,5 25 11,0 23 140 -3,0 4,5 12 6,0 12,5 78 89 23,0 - 31,0 27 43 32 105° 60°
    562487 3 8 79 20,0 7,5 37 19,0 33 186 2,0 11,0 18 7,5 - 112 112 32,5 - 46 35 105° 60°