Slot stop
No. 6491
- Login
- |
-
- |
Flat clamp, model "Mini-Bulle"
tempered and blued in black oxide finish. Complete with fastening bolts ISO 4762 (8.8), and hexagon screwdriver ISO 2936.
Packed in carton in pairs.
| Order no. |
Slot |
H min.
[mm] |
H max.
[mm] |
B | C | H1 | L | X |
F1
[kN] |
F2
[kN] |
Weight
[g] |
CAD | EUR | SC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 73098 | 12 | 2,5 | 13,5 | 18 | 1,8 | 11 | 52 | 5 | 5,0 | 0,6 | 300 |
|
114,50 | |
| 73106 | 14 | 1,5 | 13,5 | 22 | 1,8 | 11 | 55 | 5 | 5,5 | 0,7 | 380 |
|
128,00 | |
| 73114 | 16 | 2,5 | 17,0 | 25 | 2,5 | 15 | 68 | 6 | 8,0 | 0,9 | 700 |
|
143,00 | |
| 73122 | 18 | 1,5 | 16,0 | 28 | 2,5 | 15 | 71 | 6 | 9,0 | 1,0 | 830 |
|
152,00 | |
| 73080 | 22 | 4,5 | 21,5 | 35 | 3,0 | 20 | 89 | 9 | 16 | 1,9 | 1740 |
|
227,50 |
Application:
These tempered clamps are designed for extremely low workpieces. Wedge action of jaws presses the workpiece firmly and safely against the machine table. The horizontal forces are compensated by a screw related to slot size, which blocks the clamp without damage to table.
Note:
Hmin./Hmax.: depending on the groove depth according to DIN 650.
The clamping piece can be ground by X mm. This allows lower clamping heights to be achieved.
The clamping forces F1 and F2 are achieved with optimum design and utilisation of the max. tightening torque of the fastening bolts.