AMF
X
group picture
group picture

Magnetic clamping plate for milling
Premium Line

Force / pole = 4 kN

Order
no.		 A
[mm] 		B
[mm] 		A1
[mm] 		B1
[mm] 		H ±0.02
[mm] 		Pole size
[mm] 		Number of poles
[St] 		Holding force, max.
[kN] 		Weight
[Kg] 		CAD EUR SC
559634 490 295 417 230 43 50 24 96 34 5.420,00
559635 490 420 417 351 43 50 36 144 49 5.440,00
559636 490 475 417 411 43 50 42 168 56 7.360,00
559637 490 575 417 504 43 50 48 192 67 8.450,00
559638 640 295 570 230 43 50 32 128 45 6.320,00
559639 640 420 570 351 43 50 48 192 64 6.500,00
559640 640 475 570 411 43 50 56 224 73 9.000,00
559641 640 575 570 504 43 50 64 256 88 10.460,00
559642 795 295 723 230 43 50 40 160 56 7.370,00
559643 795 420 723 351 43 50 60 240 80 7.960,00
559644 795 475 723 411 43 50 70 280 90 10.690,00
559645 795 575 723 504 43 50 80 320 110 12.540,00
559646 950 295 877 230 43 50 48 192 67 8.480,00
559647 950 420 877 351 43 50 72 288 96 11.280,00
559648 950 475 877 411 43 50 84 336 108 12.850,00
559649 950 575 877 504 43 50 96 384 131 14.960,00

Design:

Magnetic chuck with square pole technology in monoblock design and very strong holding forces. For positioning, clamping and machining magnetisable materials. In conjunction with pole extensions also particularly suitable for the 5-sided machining of workpieces.

Features:

Magnetic clamping plate with metallic surface. This special and high-quality design enables the strongest holding forces to be reached in magnetic clamping technology with square pole technology.
The maximum specified holding force is effective when all poles are occupied.
A special advantage is the low construction of 43 mm. As a result, the own weight is very low, and the load on the machine table is markedly reduced.
In case of possible damage, the surface can be reworked up to 4 mm to restore the original surface quality.
The magnetic clamping plates have a height tolerance of + / - 0.02 mm in the delivered condition, but an even smaller height tolerance can be offered at any time on request.
The plug contact for the control unit is a bayonet plug IP 65 incl. protective cover. The optimal holding force is achieved with a workpiece or material thickness greater than 12 mm.
A clamping slot is also available on both sides of the faces for fastening to the machine table. Likewise, fastening bores can be made in the magnetic clamping plates. A bore plan from AMF must be requested for this.

Advantage:

- Magnetic clamping plate with metallic surface
- Environmentally friendly clamping technology: power is only needed for clamping and unclamping
- Maximum safety: holding force remains in place even in a power failure
- Maximum holding force: through the use of the latest magnetic materials
- Very low installation height
- Water-resistant plug IP 65

At this point you will actually find a video. Please accept the marketing cookies for this website to view the video. For more information, please see our privacy policy.