Set screw, ball-shaped
No. 6940
- Login
- |
-
- |
Support Element, cartridge flange
Normally extended. Spring advanced,
max. operating pressure 350 bar,
min. operating pressure 50 bar.
| Order no. |
Article no. |
Contact force F1
[N] |
Support force at 350 bar
[kN] |
Stroke C
[mm] |
Vol.
[cm³] |
Md max.
[Nm] |
Weight
[g] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|---|
| 165092 | 6964F-04-1 | 4,5-9,0 | 4,4 | 6,5 | 0,16 | 40,5 | 160 |
|
|
| 165100 | 6964F-11-1 | 9,0-26,5 | 11,0 | 9,5 | 0,33 | 40,5 | 320 |
|
Design:
Cylinder body from steel, hardened. Support pin with internal thread case hardened and ground. Wiper to protect against dirt and cooling water. Internal parts from stainless steel. Oil supply via oil channel in fixture body.
Application:
The support element is used as an extra support to prevent sagging and vibration of a workpiece.
Features:
Element with high load capacity and low height. Spring extension: the plunger is normally extended. Variable spring setting permits sensitive adjustment of contact force.
Note:
Support pin must be protected against the entry of dirt and splash water by fitting a set screw or plug. When placing into operation, ensure that all air is bled from the system. Failure to do so can cause destruction of the clamping element by the escaping diesel effect.
The supporting force should be matched to the clamping force in order to absorb machining forces.
The supporting force should always be at least twice as high as the clamping force.
-
dimensions table
Order
no.Article no. dia. A B D E F G J x depth
dia. M
SW OR-1
O-ring
Order No.DI-1
Seal
Order No.165092 6964F-04-1 16,0 47,5 40,5 5,5 7,5 M26 x1,5 M8x7,5 24 23 479550 346270 165100 6964F-11-1 20,5 62,0 49,5 6,5 8,5 M35 x 1,5 M10x11,5 31 30 479618 550211