Vertical clamp MINI

Cl = clamping, Uncl = unclamp
* Specifications with clamping arm, standard

Design:

Housing, piston, piston crown made of tempered steel, tempered and nitrided, visible components, burnished.
Two brass wipers integrated on the joint head. Connections for pneumatic monitoring of the clamping arm position.
Supplied as standard with 4 x cylinder screws (strength 12.9) and clamping arm. Oil supply via oil channel in fixture body.

Application:

The MINI vertical clamp is preferred for use in devices with little installation space. Through the oil supply in the fixture body, a very close array of the clamping elements is possible. The clamping arm position can be monitored pneumatically in the release and clamping position. Workpieces can be installed or removed automatically with handling devices.

Features:

The double-acting MINI vertical clamp permits a clearly defined movement of the clamp arm. The horizontal centre axis at the clamping lever and the pressure point on the workpiece lie in one plane. The pneumatic monitoring of the clamp arm position enables use in automatic production processes. The mechanism of the clamp is encapsulated by brass wipers, thereby ensuring very good protection against dirt.

Note:

Collision of the workpiece with the clamping arm must be avoided during loading and unloading of the clamp. Soiling at the vertical clamp must be considered or avoided through inclusion in the cleaning process. The lever ratio and operating pressure must be observed when using special clamping levers. Special attention must be paid to the tolerance of the clamping height H2; workpieces may only be clamped within this range!