AMF
X
group picture
group picture

Sequence valve, threaded design

Max. operating pressure 350 bar.

Order
no.		 Article no. Setting pressure set at factory
[bar] 		Setting range at A
[bar] 		L max. B C dia. E F G SW SW1 SW2 Md max.
[Nm] 		Md 1 max.
[Nm] 		Q max.
[l/min] 		Weight
[g] 		CAD SC
562224 6918-30-50 50 20 - 60 28,0 15,16 20,3 17,5 5,6 G1/8 16 14 4 16 7 3,8 37
562225 6918-30-100 100 35 - 150 28,0 15,16 20,3 17,5 5,6 G1/8 16 14 4 16 7 3,8 37
562226 6918-30-200 200 125 - 275 31,7 15,16 24,0 17,5 5,6 G1/8 16 14 4 16 7 3,8 45
562227 6918-40-50 50 20 - 55 34,5 18,72 27,4 21,0 5,0 G1/4 19 17 4 27 7 3,8 68
562228 6918-40-100 100 35 - 150 34,5 18,72 27,4 21,0 5,0 G1/4 19 17 4 27 7 3,8 72
562229 6918-40-200 200 125 - 275 31,8 18,72 24,6 21,0 5,0 G1/4 19 17 4 27 7 3,8 72

Design:

Housing from steel, hardened and burnished.

Application:

The sequence valve is used in cases where another consumer is connected to the circuit after a set pressure has been reached. The sequence valve ensures a controlled clamping sequence. Once a defined pressure is reached, another hydraulic circuit is opened.

Note:

The sequence valve can be screwed directly into the threaded connection for the swing clamp top flange and base flange types 6951KP, 6951FP, 6941KP and link clamp 6942KK, and with support elements for flange design 6964H and 6964HS. The oil must be supplied via the O-ring connection. The sequence valve can be screwed directly into fixtures as well.

  • dimensions table
    Order
    no.     		Article no. dia. A B +0.08 dia. D
    		 G H min.
    [mm]     		J max. K max. dia. M
    		 N
    562224 6918-30-50 8,8 15,16 16,5 G1/8 6 12,83 7 9,9 8,5
    562225 6918-30-100 8,8 15,16 16,5 G1/8 6 12,83 7 9,9 8,5
    562226 6918-30-200 8,8 15,16 16,5 G1/8 6 12,83 7 9,9 8,5
    562227 6918-40-50 11,9 18,72 21,5 G1/4 10 16,39 10 13,3 12,5
    562228 6918-40-100 11,9 18,72 21,5 G1/4 10 16,39 10 13,3 12,5
    562229 6918-40-200 11,9 18,72 21,5 G1/4 10 16,39 10 13,3 12,5