Seat Valve, 3/2-Way

for O-ring joint,
max. operating pressure 500 bar,
min. operating pressure 10 bar.

Order no.	Article no.	Q [l/min]	Viscosity [cSt]	Weight [g]	CAD	SC
564577	6910-06-06	12	10-500	840

Design:

The ball, being the essential control element, is pressed either by a magnet or a spring onto the hardened ball seats. The blocked flow direction is thus hermetically shut off. The magnets work with or without a diverter lever and are designed and checked to VDE 0580. The seat valve has a manual emergency actuator. A check valve is incorporated in channel P. The magnetic coils can be pivoted through 360° across an infinitely variable range.

Application:

The 3/2-way seat valve is used to determine the direction of oil flow. These valves are mainly used for direct control of single-acting cylinders.

Features:

Hermetic sealing by ball seats. Sealing of the oil channels of the valve base with O-rings. The seat valve has completely hydraulic pressure compensation and negative switching.

Note:

The direction of flow must be the direction of the arrow according to the symbol. The position of installation is optional. Hydraulic oil HLP or HLPD according DIN 51524 part 2.

dimensions table

Order no.	Article no.	Ambient temp. [°C]	U [V DC]	P [W]	Switching time on/off [ms]	Ed to 40°C [%]	Switching frequency per hour	Ingress protection	OR-1 O-ring Order No.	OR-2 O-ring Order No.
564577	6910-06-06	-40 - +80	24	23	100/50	100	2000	IP 65	161554	338327