AMF
X
group picture
group picture

Installation clamping module with central lock for automation solutions

Pneumatic opening.
Pneumatic blow-out.
Opening operating pressure: min. 5 bar - max. 12 bar.
Cover and piston hardened.
Repetition accuracy < 0.005 mm.

Order
no.		 Size Pull-in/locking force up to
[kN] 		Holding force*
[kN] 		Blow out Weight
[Kg] 		CAD SC
559390 KP10.3 10 25 ● 1,4

Application:

Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining.

Note:

The central lock actuated by spring force for protection of the clamping module. The pull-stud is fastened and installed using an ISO 10642 countersunk head screw M8 12.9. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The clamping module is opened pneumatically and locked mechanically by spring force. Subsequent disconnection of the pressure line is possible at any time (clamping module is clamped without pressure).

The clamping module has three connections:
1 = pneum. Opening
3 = pneum. Blow-out
5 = venting

* Please observe the installation instructions.

On request:

- Installation diagrams

  • dimensions table
    Order
    no.     		Size dia. D
    		 dia. DN
    		 dia. D1 dia. D2
    		 H HA dia. LK
    		 M T T1
    559390 KP10.3 112 22 78 25 40 10 88 M6 25 30