Hand-held controller for magnetic clamping technology
No. 2970HBG-H10
- Login
- |
-
- |
Magnetic clamping special offer package
Force / pole = 4 kN
| Order no. |
Set |
A
[mm] |
B
[mm] |
A1
[mm] |
B1
[mm] |
H ±0,1 |
Pole size
[mm] |
Number of poles
[St] |
Holding force
[kN] |
min. workpiece thickness
[mm] |
Weight
[Kg] |
CAD | EUR | SC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 559720 | 1 | 390 | 330 | 310,5 | 250,5 | 43 | 50 | 20 | 80 | 12,0 | 55,0 | - | 4.835,00 | |
| 559721 | 2 | 580 | 390 | 250,5 | 310,5 | 43 | 50 | 40 | 160 | 12,0 | 96,0 | - | 6.140,00 | |
| 559726 | 3 | 780 | 390 | 310,5 | 310,5 | 43 | 50 | 50 | 200 | 12,0 | 111,0 | - | 8.140,00 |
Features:
This special and high-quality design enables reaching of a very high holding force.
The maximum specified holding force is effective when all poles are occupied.
In case of possible damage, the surface can be reworked up to 4 mm to restore the original surface quality.
The magnetic clamping plates have a height tolerance of + / - 0.1 mm in the delivered condition.
The plug contact for the control unit is a bayonet plug IP 65 incl. protective cover.
The optimal holding force is achieved with a workpiece or material thickness greater than 12 mm.
A clamping slot is also available on both sides of the faces for fastening to the machine table. Likewise, fastening bores can be made in the magnetic clamping plates. A bore plan from AMF must be requested for this.