AMF
X
group picture
group picture

ESD push-pull type toggle clamp

With protective cap and handle made of electrostatic conductive (dissipative) material.
Without angle base. Push and pull-clamping (Equal operation of rod and lever). Long rod-guide with attaching thread and nut.
Galvanised and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Lever-parts and push-pull type toggle clamp made of tempered steel. Bearing positions are greased. Push-pull toggle clamp with threaded front for direct mounting in vertical metal plates or in fixtures.
Ergonomic, oil-resistant handle with large grip surface and soft components.
Complete with tempered, galvanised clamping screw No. 6880ESD.

Order
no.
Size F1
[kN]
F2
[kN]
Clamping
screw
Weight
[g]
CAD EUR SC
562492 0 0,8 0,8 M4 x 20 60 35,00
562493 1 1,0 1,0 M4 x 20 100 38,60
562494 2 2,0 2,0 M6 x 25 245 40,10
562495 3 2,5 2,5 M8 x 35 330 44,70

Application:

The ESD push-pull type toggle clamp has been specially developed for use in ESD protection zones (EPA – electrostatic protected area) for working on electrostatically sensitive components, assemblies or devices in accordance with the standard DIN EN 61340-5-1.

Features:

- Leakage resistance according to DIN IEC/TR 61340-5-2 between 10⁰⁴ and 10⁰⁹ Ohm
- Discharge time according to DIN IEC/TR 61340-5-2 < 2 seconds
- Surface tension (electric field strength) according to DIN EN 61340-5-1 < 100 Volt

Note:

The ESD push-pull type toggle clamp is non-insulating. It must not be used in areas where open voltages are used.
For further technical information please request the data sheet.

  • dimensions table
    Order
    no.
    Size A B min. B max. E H1 Stroke HW min. HW max. L1 L2 L3 M2 N
    562492 0 6,5 10,5 26,5 13 37,0 16 12 20 66,5 10 54 M10 x 1,0 15
    562493 1 8,0 17,5 37,5 20 45,5 20 12 20 91,0 16 74 M12 x 1,5 18
    562494 2 10,0 20,0 46,0 20 66,0 26 17 25 114,0 19 105 M16 x 1,5 22
    562495 3 12,0 24,0 56,0 30 82,5 32 22 35 140,0 22 127 M20 x 1,5 27