- Login
- |
-
- |
Swing Clamp Arm, double ended
| Order no. |
Article no. | A | C | D | E | dia. F | G | dia. H | J | L° | K | M | R | T |
Weight
[g] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 69252 | 6951-02-140 | 70 | 10,5 | 8,1 | 12,5 | 7,0 | 7,0 | 11,13 +0,05 | M6x1,00 | 22 | 27,2 | 9,5 | 9,5 | 15,9 | 118 |
|
|
| 69278 | 6951-05-222 | 111 | 14,5 | 12,1 | 18,0 | 10,5 | 8,0 | 15,89 +0,05 | M8x1,25 | 25 | 33,0 | 12,5 | 12,7 | 21,6 | 354 |
|
|
| 69294 | 6951-11-272 | 136 | 19,0 | 15,2 | 25,5 | 13,5 | 9,5 | 22,24 +0,05 | M10x1,25 | 25 | 51,6 | 17,5 | 16,6 | 31,8 | 801 |
|
Design:
Tempered and blued steel.
Application:
For all swing clamps
order no. 69252 for sizes 6951xx-02-xx, 6952EP-02-xx
order no. 69278 for sizes 6951xx-05-xx, 6952CP-06-xx, 6941KP-03-xx
order no. 69294 for sizes 6951xx-11-xx, 6941KP-05-xx
Clamp arm can be shortened for your application.
Note:
Clamping pressure, flow volume and clamping arm weight must be observed. It is also essential that clamping or support heights in either side are identical. Special versions available on request.