Collet attachment inside clamping

Collet attachment made of high-strength aluminium, hard anodised. With circlip made of tempered steel, burnished.

Order no.	Size	dia. D	dia. D1	dia. D2	dia. D3	H	H1	H2	H3	H4	Clamping stroke Ø [mm]	Weight [g]	CAD	EUR	SC
567125	10	70	32,7	11,2	65	41,5	10	7	14,5	9,5	0,3	327		154,50
567126	20	99	44,7	16,0	90	46,5	10	10	14,5	9,5	0,3	779		196,00

Design:

Collet attachments are always supplied with circlip.

Application:

The collet attachment is fastened using fastening kit 6375BI (observe torque specifications) on the base element 6375M. To secure the workpiece contour, the collet attachment must be clamped with the circlip. Then the workpiece contour is milled into the collet attachment with a minimum clamping depth of 10 mm. Then the circlip is removed, and the workpiece can be clamped. To secure new workpiece contours, the collet attachment can be milled off up to a diameter (D1).

Note:

The collet attachment must always be clamped with the workpiece or circlip. To remove the vertical play between the collet attachment and base element, light pretensioning must be applied by actuating the clamping stud after the workpiece is inserted.

Advantage:

- Clamping of blind holes and through-holes
- Free-form clamping
- Clamping of delicate and thin-walled workpieces
- The workpiece is clamped without distortion due to the radially even clamping force imposed on it
- Multiple insertion of different workpiece contours possible