- Login
- |
-
- |
AMF Marker Extra Large
Marking tool, suitable for 20 mm collets and Weldon holders (Weldon holders only when using the function check).
Marking needles are not included.
| Order no. |
D1
[mm] |
D2
[mm] |
D3
[mm] |
D4
[mm] |
D5
[mm] |
L1
[mm] |
L2
[mm] |
L3
[mm] |
L4
[mm] |
L5
[mm] |
L6
[mm] |
Weight
[g] |
CAD | EUR | SC |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 548180 | 4 | 20 | 26 | 40 | 46 | 125,5 | 118 | 7,5 | 26 | 74 | 36 | 326 |
|
1.095,00 |
Application:
Material and surface quality:
The AMF-Marker Extra Large is particularly suitable for the labelling of alloyed steel, hardened steel or cast steel. The surface of the component can be rough and uneven.
Type size and type width:
Centric marking needles are suitable for small letters and narrow lines. The font becomes wider by the use of eccentric marking needles and the rotation of the machine spindle. To ensure a good text, please observe the following note:
Spindle speed (1/min) / 10 = feed rate (mm/min)
Max. permissible spindle speed: 8,000 1/min
Needle pressure and batch size setting:
It is possible to adjust the needle pressure in the clamped state of the tool by the external adjusting ring. For this reason, we also recommend the AMF-Marker Extra Large for small batch sizes, or for batch size 1.
Features:
Change and choice of needle:
Instant change of needle by pulling out the marking needle using pliers, for example, with our special pliers No. 1530Z. Centric and eccentric needles are obtainable for the AMF-Marker Extra Large.
Function check:
Thanks to the possibility of checking the presence of the marking needle by means of an optional pneumatic dynamic pressure query, the AMF-Marker Extra Large is also ideally suited for use in automation.
Advantage:
- Labelling of alloyed steel, hardened steel or cast steel with rough and uneven surface
- Centric and eccentric marking needles available
- External adjusting ring for adjusting the needle pressure
- instant change of needle
- Function check possible