AMF
X
group picture
group picture

Link Clamp

double-acting
max. operating pressure 350 bar,
min. operating pressure 25 bar.

Order
no.
Article no. Clamping force
at 100 bar *
[kN]
Clamping force
at 350 bar*
[kN]
Piston force
at 100 bar
[kN]
Piston force at 350 bar
[kN]
Stroke
[mm]
Vol. Sp
[cm³]
Vol. Lo
[cm³]
eff. piston
area Sp
[cm²]
eff. piston
area Lo
[cm²]
Md max.
[Nm]
Piston
rod dia.
[mm]
Piston
dia.
[mm]
Q max.
[l/min]
Weight
[g]
CAD SC
321695 6959KL-160 1,5 5,4 2,0 7,0 17,0 7,4 1,5 2,0 0,9 6,3 12 16 0,50 755
322057 6959KL-200 2,4 8,4 3,1 11,0 23,0 7,2 3,2 3,1 1,4 12,0 15 20 0,78 1876
321711 6959KL-250 3,8 13,2 4,9 17,2 26,5 13,0 6,3 4,9 2,4 25,0 18 25 1,24 2390
322032 6959KL-320 6,2 21,6 8,0 28,1 34,0 27,3 10,7 8,0 3,1 50,0 25 32 2,02 5320
322040 6959KL-400 9,7 33,8 12,6 44,0 43,0 54,0 27,6 12,6 6,4 95,0 28 40 3,18 8820

Cl = clamping, Uncl = unclamp
* Specifications with clamping arm, standard

Design:

Cylinder housing from hardened steel, tempered. Top mounting with four cylinder screws (resistance min. 12.9), these are included in the supply scope. Pistons and bolts from from hardened steel, tempered, ground and nitrided. All parts nickel plated.
Supply scope includes hinge pins and tension plates, but not clamping levers. Oil supply via threaded port or oil channel in fixture body.

Application:

The lever-type clamping fixture is used in clamping devices where workpieces need to be freely accessible and must be placed in from above. Particularly well suited for clamping in clamping pockets. Good corrosion resistance and high surface hardness (approx. 615 HV) is provided by chemical nickel plating (specifications MIL-C-2607 AE, ASTM B733 and AMS 2404D).

Features:

Top flange version, lever mechanism can be turned in the range of 180º in 90º steps. Special designs are possible.

Note:

Proximity switch and electrical pressure-point monitoring can be supplied on request.

  • dimensions table
    Order
    no.
    Article no. A A1 B C D E F G H H1 H2 H3 H4 H5 H6 I dia. K
    L M N P O R S W ØG2 U V OR-1
    O-ring
    Order No.
    321695 6959KL-160 43,0 26,3 16,0 21,0 6,0 26,0 14,5 G1/8 20 86,0 52 72 48,5 24 15 11,0 30 51,5 18 4,5 15 9 36 45 68,6° 5,8 8,5 17,5 161802
    322057 6959KL-200 56,5 33,0 21,0 27,5 6,0 35,0 13,5 G1/4 26 120,5 72 103 61,5 34 25 14,0 38 70,0 27 8,0 20 14 54 70 74,4° 6,5 15,0 21,5 321646
    321711 6959KL-250 63,5 40,3 24,0 31,5 8,0 40,0 18,5 G1/4 27 129,3 75 110 65,0 37 27 14,0 42 74,0 30 7,0 24 14 60 74 73,7° 8,5 16,0 23,5 321646
    322032 6959KL-320 82,0 51,0 32,0 42,0 8,0 52,0 24,0 G1/4 35 167,5 103 145 81,5 47 27 15,0 52 100,0 39 11,0 30 14 78 100 70,5° 10,5 16,0 30,0 321646
    322040 6959KL-400 101,0 61,5 39,5 51,5 8,0 65,5 28,5 G1/4 35 193,0 113 169 94,5 50 27 17,5 63 125,0 50 12,5 35 18 100 125 72,2° 12,5 18,0 38,0 321646

    Order
    no.
    Article no. G3 x depth R ±0,2 dia. T U V ØWW +0.1 X dia. Y x max. depth
    321695 6959KL-160 M5 x 11 36 3,0 8,5 17,5 30,2 0,2 x 45° 7,8 x 0,1
    322057 6959KL-200 M6 x 18 54 5,0 15,0 21,5 38,2 0,2 x 45° 12,7 x 0,1
    321711 6959KL-250 M8 x 16 60 5,0 16,0 23,5 42,2 0,2 x 45° 12,7 x 0,1
    322032 6959KL-320 M10x16 78 5,0 16,0 30,0 52,2 0,2 x 45° 12,7 x 0,1
    322040 6959KL-400 M12x18 100 5,6 18,0 38,0 63,2 0,2 x 45° 12,7 x 0,1