Installation clamping module
No. 6370EARHA
Hydraulic opening.
Pneumatic blow-out.
Opening operating pressure: min. 50 bar - max. 60 bar.
Cover and piston hardened.
Repeatability < 0.005 mm.
Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining.
The flange version permits a simplified installation in the body. This is exactly positioned via the centring function. The clamping module can be operated from the outside via a tube connection or from the bottom via an O-ring connection.
This is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free).
The clamping module with blow-out and support control has two connections:
1x hydr. opening (1) / 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
* Please observe the installation instructions.
Order no. |
Size | dia. DA |
dia. DN |
dia. D1 | HA | K |
dia. LK |
M | R | T |
---|---|---|---|---|---|---|---|---|---|---|
424085 | KH10 | 100 | 22 | 67 | 24 | 9 | 90 | M5 | G1/8 | 5,9 |
423962 | KH20 | 136 | 32 | 100 | 35 | 13 | 124 | M6 | G1/8 | 8,9 |
424143 | KH40 | 180 | 40 | 125 | 45 | 15 | 163 | M8 | G1/4 | 11,9 |