Clamping module with sensor query for opening and interlock
No. 6104L
Pneumatic opening.
Operating pressure for opening: min. 8 bar - max. 12 bar.
Operating pressure for retensioning (turbo) min. 5 bar - max. 6 bar.
Cover and piston hardened.
Flange housing: Aluminium
Repetition accuracy < 0.005 mm.
Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining.
The installation clamping module with sensor query contains 2 inductive sensors (connection type: S8 plug, cable length: 150 mm) for status check (opened / locked). This is pneumatically opened (1) and mechanically locked through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free).
Use of the pneumatic pressure booster no. 6370ZVL is recommended.
The clamping module has two connections:
1 = pneum. opening
2 = pneum. retensioning (turbo)
* Please observe the installation instructions.
Order no. |
Size |
dia. D |
dia. DA |
dia. DN |
E | E1 | H | HA | K | K1 |
dia. LK |
dia. M |
dia. N H7 | R | W | W1 | W2 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
552963 | KP10 | 78 | 104 | 22 | 10,0 | - | 37 | 44 | 28 | 11 | 90 | 6,6 | 8 | G1/8 | 6,4° | 45° | 45° |
552964 | KP20 | 112 | 143 | 32 | 10,0 | 24 | 38 | 48 | 26 | - | 127 | 9,0 | 8 | G1/8 | 7,5° | - | 45° |
552965 | KP40 | 148 | 188 | 40 | 13,6 | 31 | 47 | 62 | 32 | - | 168 | 11,0 | 10 | G1/8 | 5,0° | - | 45° |