AMF
X

Swivel Clamping Strap, hydraulic clamping, mechanic unclamping

Single acting, with spring return,
max. operating pressure 250 bar.

Order
no.
Article no. A Clamping height
[mm]
Clamping stroke
[mm]
Clamping force
at 250 bar below
[kN]
Clamping force
at 250 bar centre
[kN]
Clamping force
at 250 bar top
[kN]
Piston
dia.
[mm]
Vol.
[cm³]
Spring force min.
[N]
Weight
[g]
CAD SC
65417 6954-14 14 40 - 80 0 - 5 30 26 24 32 4,8 150 3320
65433 6954-16 16 40 - 80 0 - 5 30 26 24 32 4,8 150 3320
65458 6954-18 18 40 - 80 0 - 5 30 26 24 32 4,8 150 3320
65474 6954-20 20 40 - 80 0 - 5 30 26 24 32 4,8 150 3320
65490 6954-22 22 40 - 80 0 - 5 30 26 24 32 4,8 150 3320

* Max. clamping force at 400 bar operating pressure.

Design:

Clamp (with swivel lock), clamping bolt and sleeve tempered and blued. Cylinder body made of tempering steel, blued. Piston and piston rod case-hardened and ground. Wiper at piston rod, venting screw and sinter metal breather. Long piston guiding and Teflon guide ring at piston.

Application:

The swivel clamping strap is intended for the most frequently occurring tool clamping heights.

Features:

Large clamping range, fast height adjustmentto the required tool clamping edge height. The swivel clamping strap is inserted directly into the T-slot of the press. The workpiece can also be removed vertically upwards as the clamping bar can be swivelled away manually. The clamping bar is mechanically locked in the clamping position.

Note:

For single-acting cylinders, there is a risk of coolant being sucked through the breather port. In this case the cylinders have to be protected against the direct effect of coolant. The built in sinter metal breather should be protected. When placing into operation, ensure that all air is bled from the system.

On request:

Further sizes, specially made bases for bigger clamping heights and other T-slot sizes on request.