AMF
X

Pull Cylinder, base-flange-mounting, with guided piston rod

Single-acting, with spring return,
max. operating pressure 350 bar,
min. operating pressure 52 bar.

Order
no.
Article no. Pull force at 350 bar
[kN]
Stroke
[mm]
Vol. pull
[cm³]
Q max.
[l/min]
Weight
[g]
CAD SC
66480 6951FZ-02-10 2,2 14,5 0,92 0,165 463
66522 6951FZ-05-10 6,6 20,0 3,82 0,400 1150
66563 6951FZ-11-10 13,9 29,5 11,90 1,640 2050

Design:

Cylinder barrel from steel, hardened and burnished. Piston rod case hardened and chrome plated. Piston rod with internal thread and clamping arm positioning. O-ring for flange seal. Wiper at piston rod. Return spring from stainless steel. Oil supply via threaded connection or oil channel in the fixture body.

Application:

Universal Push-Pull Cylinder for various applications.

Features:

Each cylinder size is available for single or double-acting operation. Various thrust pieces can be attached in the tapped piston rod ends. Clamps can be attached, as with the swing clamps.

Note:

The piston is guided, therefore, the max. permissable oil flow rate Q max. must be observed in order to protect the mechanism. No force must be introduced at the piston when mounting accessory. For single acting cylinders there is risk of sucking in coolant through the breather port. In such cases the breather port has to be piped to a clean protected area. The system has to be completely vented during installation.

  • dimensions table
    Order
    no.
    Article no. dia. A C D F G dia. H J dia. K
    L P dia. Q S T V dia. Y AA° AC ØAD BB OR-1
    O-ring
    Order No.
    66480 6951FZ-02-10 26,8 103 71,0 26,5 13,5 11,13 M6 6 7 45 40,0 31,0 47 15,5 120 42 30,0 60 G1/8 3,2 M5 183608
    66522 6951FZ-05-10 38,0 135 92,5 25,0 15,0 15,88 M10 7 12 57 50,0 33,5 54 19,0 120 50 55,0 110 G1/8 4,8 M6 183608
    66563 6951FZ-11-10 45,4 173 112,5 28,5 16,5 22,23 M12 9 13 55 59,5 42,0 71 27,5 90 62 22,5 45 G1/4 4,8 M8 183608