AMF
X

Link clamp

double acting, clamp arm right,
max. operating pressure 100 bar,
min. operating pressure 15 bar.

Order
no.
Article no. Clamping force
at 100 bar
[kN]
Piston force
at 100 bar
[kN]
Clamping stroke
[mm]
Total stroke
[mm]
Extra stroke
[mm]
Vol. Sp
[cm³]
Vol. Lo
[cm³]
eff. piston
area Sp
[cm²]
eff. piston
area Lo
[cm²]
Md max.
[Nm]
Weight
[g]
CAD SC
327585 6942KK-25R 3,2 4,9 17,5 19,0 1,5 8,6 6,6 4,9 3,8 6,0 752
328526 6942KK-32R 5,3 8,0 22,5 24,0 1,5 16,5 13,3 8,0 6,5 7,6 1098
328534 6942KK-38R 7,5 11,3 24,5 26,0 1,5 27,8 22,9 11,3 9,3 11,0 1549
328625 6942KK-45R 10,5 15,9 28,0 29,5 1,5 44,5 35,8 15,9 12,8 13,0 2362
552013 6942KK-56R 17,0 25,5 33,0 34,5 1,5 84,2 71,7 25,5 21,7 28,0 3565

Sp = clamp, Lo = unclamp

Design:

Cylinder housing from steel. Piston and hinge pins from hardened steel, tempered and nitrided. Metal wiper to protect the dirt wiper integrated into the housing. Supply scope includes hinge pins, tension plates, fastening screws but not clamping levers. The threaded connections are suitable for restrictor check valves no. 6916-12-XX. Oil supply via threaded connection or oil channel in the fixture body.

Application:

Link clamps are used in clamping fixtures in which workpieces must be freely accessible and loaded from above. Particularly suitable for clamping in clamping pockets.

Features:

Top flange version, the horizontal centre axis at the standard lever and the pressure point on the workpiece lie in one plane. This prevents relative movement on the workpiece.

Note:

Maximum travel speed 0.5 m/s. The volumetric flow can be regulated via the restrictor check valve
The B to C leverage on the clamping levers is 1 to 1.5!
In the design of blank levers, deviations which lead to higher clamping forces are permitted only in exceptional cases. For sizes 32 and 45, screws with strength class 12.9 must be used.

  • dimensions table
    Order
    no.
    Article no. A A1 B C D E F G H H1 H2 H3 H4 I dia. K
    L M N P O R S U V X ØG2 OR-1
    O-ring
    Order No.
    327585 6942KK-25R 46,00 15,8 16,0 24,0 3,5 0,5 17,5 G1/8 25 83 58,0 64,0 29,0 13 39,9 54 17,0 5,5 12,0 18 34 45 9 26,0 67,5 5,5 161810
    328526 6942KK-32R 53,25 13,7 18,5 28,0 3,5 2,0 21,0 G1/8 28 95 66,5 74,5 32,0 13 47,9 61 20,0 5,5 13,5 22 40 51 11 30,0 76,8 5,5 161810
    328534 6942KK-38R 60,50 16,0 21,0 31,5 3,0 1,5 22,5 G1/8 28 106 72,0 81,0 37,0 13 54,9 69 23,5 6,5 16,0 24 47 60 12 33,5 72,9 6,8 161810
    328625 6942KK-45R 71,00 18,7 24,5 37,0 3,0 2,5 26,5 G1/4 30 124 82,0 96,0 43,5 14 64,9 81 27,5 7,5 19,0 30 55 70 15 39,5 72,9 6,8 161810
    552013 6942KK-56R 86,00 30,2 30,0 45,0 3,0 2,5 32,5 G1/4 35 140 89,0 105,0 47,0 14 74,9 94,5 31,5 11,0 22,0 32 63 85 16 45,0 67,5 8,7 161810

    Order
    no.
    Article no. G3 x depth R ±0,2 dia. T U V dia. W X1 dia. Y x max. depth
    327585 6942KK-25R M5 x 13 34 3 9 26,0 40,5 0,5 x 45° 10 x 0,1
    328526 6942KK-32R M5 x 13 40 3 11 30,0 48,5 0,5 x 45° 10 x 0,1
    328534 6942KK-38R M6 x 13 55 3 12 33,5 55,5 0,5 x 45° 10 x 0,1
    328625 6942KK-45R M6 x 13 55 3 15 39,5 65,5 0,5 x 45° 10 x 0,1
    552013 6942KK-56R M8 x 17 63 3 16 45,0 75,5 0,5 x 45° 10 x 0,1