AMF
X

Threaded Cylinder with spherical piston rod

single acting, spring return,
max. operating pressure 500 bar.

Order
no.
Article no. Push force at 100 bar
[kN]
Push force at 500 bar
[kN]
Stroke H
[mm]
Vol.
[cm³]
Piston area
[cm²]
Md max.
[Nm]
Spring force min.
[N]
Weight
[g]
CAD SC
60178 6932-02 0,5 2,5 4 0,20 0,5 80 25 50
60186 6932-05 1,1 5,5 4 0,45 1,1 90 35 80
60194 6932-08 2,0 10,0 6 1,20 2,0 110 65 130
60202 6932-12 3,0 15,0 8 2,50 3,1 120 100 300
60210 6932-20 5,0 24,5 12 5,90 4,9 130 155 470

Design:

Cylinder barrel from steel, burnished with hex nut. Piston and piston rod case hardened and ground. Wiper at piston rod. Built-in return spring. Sintered bronze breather. Attachment with standard fine thread. Sealing by sealing edge, see "Notes". Oil supply via oil channel in fixture body.

Application:

Ideal for clamping bars for tolerance compensation in multiple fixtures and for positioning, clamping or discharging workpieces.

Features:

Small dimensions, can be installed closely spaced side-by-side. The cylinders must be screwed into the fixture body up to the hexagon.

Note:

The screw-in cylinders cannot be loaded in the retracted position. For single acting cylinder types, there is a risk of sucking in liquid. The cylinders must be protected against direct penetration of cutting and cooling liquids. The built-in sintered bronze filter should be protected by appropriate arrangement or by a cover. Sealing by sealing edge. For the locating hole, the sealing surface must be at right angles to the thread, flat and not hardened.

  • dimensions table
    Order
    no.
    Article no. Piston
    dia.
    [mm]
    A B C dia. E G L P +1 R SW1 U min. dia. Y
    60178 6932-02 8 14 1 12 5 M16x1,5 27 12 10 19 24 23
    60186 6932-05 12 14 1 12 8 M20x1,5 27 12 28 24 30 29
    60194 6932-08 16 21 2 14 10 M24x1,5 37 14 30 27 34 33
    60202 6932-12 20 27 2 18 12 M30x1,5 47 18 36 36 44 43
    60210 6932-20 25 33 2 21 16 M36x1,5 56 21 50 41 50 49