Filter with rectifier circuit
No. 6981G
- Login
- |
-
- |
Check valve, pilot operated
for O-ring connection,
max. operating pressure 700 bar.
| Order no. |
Article no. |
Q
[l/min] |
Differenz p at flow
[bar] |
Releasing ratio PA(B) / PZ |
Ambient temp. [°C] |
Aperture pressure
[bar] |
Weight
[g] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|---|
| 339374 | 6916-08-10 | 20 | 3 | -40 - +80 | 183335 | 457499 | 300 |
|
Design:
Complete with four fastening bolts M4 x 25 - 8.8. Spring-loaded ball seat valve for plate assembly, leak oil free. Components made of steel. The connection channels must be self-produced using connection plates. Sealing is with O-rings. Nomenclature of the connection ducts: A = consumer, B = pump side, Z = control, L = leak oil (relief of the vacuum piston chamber)
Application:
For unhindered flow in one direction and blocked flow in the other direction. The blocked direction can be controlled via a control connection. The valve is used for the leak oil-free pressure maintenance on hydraulic consumers in combination with leak oil-containing directional spool valves or leak oil-containing media penetrations.
Note:
Max. permissible pressure at connections A, B, Z = 700 bar. Connection L must be depressurised to the tank.
The minimum pressure for keeping the connection open is calculated from the formula pst = a x Δp + b x pB + c!
Coefficients for valve 6916-08-10: a = 0.235 / b =0.03 / c = 4.8!
Δp = Flow resistance and pB = pressure at connection B, see diagrams.