AMF
X
group picture
group picture

ESD horizontal toggle clamp

With protective cap and handle made of electrostatic conductive (dissipative) material.
With open clamping arm and horizontal base.
Galvanised and passivated. Rivets made of stainless steel, which, for sizes 2 and 3, run in hardened bushings. Bearing positions are greased.
Ergonomic, oil-resistant handle with large grip surface and soft components. Retainer for the clamping screw at the end of the clamp arm.
Complete with tempered, galvanised clamping screw No. 6890ESD.

Order
no.
Size F1
[kN]
F2
[kN]
Clamping
screw
Weight
[g]
CAD EUR SC
562488 0 0,25 0,4 M4 x 25 35 23,60
562489 1 0,8 1,1 M5 x 30 105 28,80
562490 2 1,0 1,2 M6 x 35 185 29,90
562491 3 1,8 2,5 M8 x 45 320 35,00

Application:

The ESD horizontal toggle clamp has been specially developed for use in ESD protection zones (EPA – electrostatic protected area) for working on electrostatically sensitive components, assemblies or devices in accordance with the standard DIN EN 61340-5-1.

Features:

- Leakage resistance according to DIN IEC/TR 61340-5-2 between 10⁰⁴ and 10⁰⁹ Ohm
- Discharge time according to DIN IEC/TR 61340-5-2 < 2 Sekunden
- Surface tension (electric field strength) according to DIN EN 61340-5-1 < 100 Volt

Note:

The ESD horizontal toggle clamp is non-insulating. It must not be used in areas where open voltages are used.
For further technical information please request the data sheet.

  • dimensions table
    Order
    no.
    Size A B C D D1 E F H H1 H2 HW min. HW max. I K L L1 M M1 N P α
    562488 0 4 28 11,5 - 15,5 4,6 - 9,0 5,5 41,5 23,0 34 -5,5 0,0 7,5 6,3 - 79 16,0 - 25,0 25,5 90°
    562489 1 5 42 13,0 - 14,5 5,2 - 18,7 8,0 19,0 30,0 49 -3,0 2,5 10,0 5,5 - 120 18,0 - 21,5 - 34,0 34,0 90°
    562490 2 6 64 26,0 5,6 5,6 32,0 16,0 24,0 45,0 68 -1,5 5,0 13,2 6,0 12,7 162 19,5 - 29,5 28,5 42,0 38,0 90°
    562491 3 8 73 25,7 6,5 5,1 38,0 14,0 32,0 48,5 86 -2,0 9,0 15,0 7,0 13,0 206 22,0 - 31,8 31,6 45,5 50,0 90°