Centring clamp with ball
No. 6383ZEK
- Login
- |
-
- |
Centring clamp with ball
Can be used from below.
Repeatability ± 0.025 mm
Concentricity ±0.050 mm
| Order no. |
D min. | D max. | A min. | A max. | H |
P
[kN] |
Weight
[g] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|---|
| 373563 | 11,7 | 14,2 | 3,0 | 4,0 | 10,0 | 0,5 | 8 | - | |
| 373571 | 14,5 | 18,5 | 8,6 | 9,8 | 14,5 | 3,5 | 18 | - | |
| 373589 | 18,5 | 22,5 | 10,4 | 11,6 | 16,5 | 4,0 | 36 | - | |
| 373597 | 22,5 | 26,5 | 13,0 | 14,2 | 19,8 | 4,5 | 61 | - | |
| 373605 | 26,5 | 30,5 | 13,0 | 14,2 | 19,8 | 4,5 | 80 | - | |
| 373613 | 30,5 | 38,5 | 11,9 | 14,2 | 23,2 | 4,5 | 114 | - | |
| 373621 | 38,5 | 46,5 | 15,5 | 17,8 | 27,2 | 6,5 | 221 | - | |
| 373639 | 46,5 | 54,5 | 15,7 | 18,0 | 27,2 | 6,5 | 305 | - | |
| 373647 | 54,5 | 70,5 | 19,1 | 23,7 | 40,6 | 8,0 | 590 | - | |
| 373654 | 70,5 | 86,5 | 23,7 | 28,3 | 46,1 | 10,0 | 1180 | - | |
| 373662 | 86,5 | 102,5 | 25,7 | 30,2 | 51,0 | 12,5 | 1880 | - |
Application:
For central positioning and clamping in blind holes where slight ball impressions are acceptable. Operation from below, automated or manual.
Note:
For deep installation, clearance D max. must be provided.
Installation tool: Hole K for retaining pin for determining the precise position of the balls. (supplied without installation tool)
Advantage:
- Low installation height
- Clamping in the zero point
- Pull-down effect
- Distortion-free clamping
-
dimensions table
Order
no.B B1 C E f7 F G I ±0,1 K L M M1 Q QD R SW T 373563 12,8 11,0 3,5 10 5 M5 3,5 1,5 1,4 M5 M3 3 2,5 10 5,5 2,0 373571 17,3 14,1 5,5 12 6 M6 4,5 2,0 2,3 M6 M3 3 4,0 12 5,5 2,5 373589 20,9 18,2 7,5 15 8 M8 5,5 2,5 2,3 M8 M4 3 4,0 14 7,0 3,5 373597 25,4 17,4 6,0 20 10 M10 7,0 3,0 2,3 M10 M5 3 4,0 15 8,0 3,5 373605 25,4 17,4 6,0 20 10 M10 7,0 3,0 2,3 M10 M5 3 4,0 15 8,0 3,5 373613 30,3 21,9 7,0 25 12 M12 9,0 4,0 4,6 M12 M6 3 8,0 20 10,0 3,5 373621 34,2 22,5 7,5 30 12 M12 11,0 4,0 4,6 M12 M6 6 8,0 20 10,0 4,5 373639 34,2 22,5 7,5 30 12 M12 11,0 4,0 4,6 M12 M6 6 8,0 20 10,0 6,5 373647 49,9 24,5 9,0 45 14 M14 x 1,5 15,0 5,0 9,3 M14 x 1,5 M8 6 16,0 32 13,0 6,5 373654 55,4 29,4 10,0 60 16 M16 x 1,5 17,0 5,0 9,3 M16 x 1,5 M8 6 16,0 20 13,0 6,5 373662 61,6 29,4 10,0 60 16 M16 x 1,5 25,0 5,0 9,3 M16 x 1,5 M10 6 16,0 25 16,0 6,5 Q = number of balls, QD = diameter of the balls