AMF
X

Magnetic clamping plate for milling

"Premium-Line" Force / pole = 4 kN

Order
no.
A
[mm]
B
[mm]
H ±0.02
[mm]
Pole size
[mm]
Number of poles
[St]
Holding force, max.
[kN]
Weight
[Kg]
CAD SC
559634 490 295 43 50 24 96 34  -
559635 490 420 43 50 36 144 49  -
559636 490 475 43 50 42 168 56  -
559637 490 575 43 50 48 192 67  -
559638 640 295 43 50 32 128 45  -
559639 640 420 43 50 48 192 64  -
559640 640 475 43 50 56 224 73  -
559641 640 575 43 50 64 256 88  -
559642 795 295 43 50 40 160 56  -
559643 795 420 43 50 60 240 80  -
559644 795 475 43 50 70 280 90  -
559645 795 575 43 50 80 320 110  -
559646 950 295 43 50 48 192 67  -
559647 950 420 43 50 72 288 96  -
559648 950 475 43 50 84 336 108  -
559649 950 575 43 50 96 384 131  -

Design:

Magnetic chuck with square pole technology in monoblock design and very strong holding forces. For positioning, clamping and machining magnetisable materials. In conjunction with pole extensions also particularly suitable for the 5-sided machining of workpieces.

Features:

Magnetic chuck with metallic surface. This special and high-quality design enables the strongest holding forces to be reached in magnetic clamping technology with square pole technology.
The maximum stated holding force is specified for the complete allocation of all poles.
One particular advantage is the low design of 43 mm. This enables the dead weight to be very low and reduces the machine table load considerably.
In the event of possible damage to the surface, this can be reworked up to 4 mm in order to restore the original surface quality.
The magnetic chucks have a height tolerance of +/- 0.02 mm in the delivered condition, but an even smaller height tolerance can be offered at any time on request.
The plug contact for the control unit is a water-resistant push-pull plug incl. protective cover. The optimum holding forces are reached from a workpiece and material thickness greater than 12 mm.
A clamping slot is also available on both sides of the faces for fastening to the machine table. Mounting holes can also be incorporated into the magnetic chuck. A drill plan at AMF is required for this.
The M8 internal thread for fastening the pole extension is directly aligned centrally - without a threaded bush - in each pole.

Advantage:

- Magnetic chuck with metallic surface
- Environmentally friendly clamping technology: Energy is only needed for clamping and releasing
- Highest level of safety: Holding force is retained even in the event of a power failure
- Maximum holding force: by using the latest magnetic materials
- Very low installation height