AMF
X

Power clamp

Continuously adjustable clamping element made of alloyed tempered steel in forged, black galvanised design. Complete with mounting kit 7600BFS.
Thrust piece in smooth and ribbed variant, optionally available.

Order
no.
Size max. load
[kN]
M Slot H V L Weight
[g]
CAD SC
556406 22 22 M12 14 5 - 38 15 - 50 65 700
556186 30 30 M12 14 6 - 68 13 - 110 135 2013
556187 30 30 M16 18 6 - 68 16 - 114 135 2045
556189 32 32 M12 14 6 - 50 12 - 82 95 1462
556190 40 40 M16 18 6 - 50 15 - 95 110 2262
556188 43 43 M16 18 5 - 80 16 - 134 155 3158
554198 49 49 M20 22 7 - 88 19 - 165 175 5928

Application:

1. Position carrier element on the tool table and secure with the specified tightening torque Md.
2. Move the clamp arm to the desired position.
3. Moving the adjusting screw clamps the workpiece.

Note:

- The max. load may differ, depending on the manner of clamping and condition of the threads (lubrication).
- To reduce the wear on the adjusting screw, we recommend the use of AMF screw compound no. 6339. It possesses a synergistic combination of highly-effective solid lubricants and is heat-resistant and does not wash out.
- Use only with the associated AMF mounting kit 7600BFS.
- Size 30 M16 is not suitable for use with no. 7600Z.

Advantage:

- Low installation height
- High clamping force of 22 - 49 kN
- Height and length continuously adjustable
- The very robust design enables quick and easy clamping
- Elements easy to install
- For use in T-slots 14 - 28 mm and/or grid plates M12, M16, M20
- 2 thrust piece variants

  • dimensions table
    Order
    no.
    Size A B1 B2 B3 E1 H1 K M1 SW1 Md 1
    [Nm]
    Md
    [Nm]
    556406 22 30 13 45 13 11 58 - M12 6 50 40
    556186 30 36 13 54 18 13 85 25 M16 8 100 70
    556187 30 36 17 54 18 16 85 28 M16 8 100 150
    556189 32 36 13 54 18 12 78 20 M16 8 120 70
    556190 40 42 17 60 20 15 92 26 M20 10 150 150
    556188 43 42 17 60 20 16 105 32 M20 10 220 150
    554198 49 52 21 75 25 19 125 36 M24 12 220 200