Swing clamp, top-flange-mounting, precision design
max. operating pressure 350 bar,
min. operating pressure 35 bar.
Sp = clamp, Lo = unclamp
* Clamping forces with short clamping arm.
** Not a stock item!
Hardened and burnished steel cylinder barrels. Piston rod hardened and chrome plated. Wiper at piston rod. Supply scope does not include clamping arm. Oil supply via threaded connection or oil channel in the fixture body.
The swing clamp is used particularly in fixtures in which the workpiecesmust be freely accessible and placed from above. Workpieces with difficult shapes can also be clamped using special clamp arms (available on request).
The swing motion is executed via three ball guides, thereby increasing positioning accuracy, repeat accuracy and service life.
The piston is guided, and so the max. permissable oil flow rate Q max. as well as the clamping arm length and weight must be observed. When mounting accessories at the piston, no force may be applied to the piston. When installing, ensure that all air is bled from the system.
To control the oil feed, the throttle/check valve no. 6916-12-04 can be optionally used. Other swivel angles are available on request.