AMF
X
group picture
group picture

ESD push-pull type toggle clamp

With protective cap and handle made of electrostatic conductive (dissipative) material.
short version. For push and pull-clamping. Long rod-guide with attaching thread and nut.
Galvanised and passivated. Piston rod is made of non-rusting steel. Shoulder screws tempered. Bearing positions are greased.
Ergonomic, oil-resistant handle with large grip surface and soft components.
Complete with tempered, galvanised clamping screw No. 6880ESD.

Order
no.		 Size F1
[kN] 		F2
[kN] 		Clamping
screw
 Weight
[g] 		CAD EUR SC
562496 2 1,0 1,0 M6 x 25 130 49,30
562497 3 2,5 2,5 M8 x 35 320 55,00

Application:

The ESD push-pull type toggle clamp has been specially developed for use in ESD protection zones (EPA – electrostatic protected area) for working on electrostatically sensitive components, assemblies or devices in accordance with the standard DIN EN 61340-5-1.

Features:

- Leakage resistance according to DIN IEC/TR 61340-5-2 between 10⁰⁴ and 10⁰⁹ Ohm
- Discharge time according to DIN IEC/TR 61340-5-2 < 2 Sekunden
- Surface tension (electric field strength) according to DIN EN 61340-5-1 < 100 Volt

Note:

The ESD push-pull type toggle clamp is non-insulating. It must not be used in areas where open voltages are used.

  • dimensions table
    Order
    no.     		Size A B E H H1 Stroke HW min. HW max. L1 L2 L3 M M2 N
    562496 2 10 36 15 24 73 21,5 17 25 68,5 13 68 M6 M16 x 1,5 30,5
    562497 3 12 57 25 33 123 40,0 22 35 108,0 16 115 M8 M20 x 1,5 33,0


Matching accessories and similar products

Angle base, solid

No. 6843
ESD clamping screw

No. 6880ESD