Ball-pad
No. 6440
- Login
- |
-
- |
Precision wedge block
Centring hole Ø 12 mm. Case-hardened steel and fine-machined wedge surfaces. A spherical attachment no. 6440 is included with every precision whipstock.
| Order no. |
Size |
H min.
[mm] |
H max.
[mm] |
H/U*
[mm] |
F max.
[kN] |
SW
[mm] |
Weight
[Kg] |
CAD | EUR | SC |
|---|---|---|---|---|---|---|---|---|---|---|
| 375592 | 55 | 50 | 55 | 0,71 | 40 | 22 | 2,8 |
|
1.220,00 | |
| 375618 | 85 | 77 | 85 | 0,71 | 250 | 36 | 11,5 |
|
1.560,00 |
*H/U= height adjustment per single turn.
Application:
- The fine-machined wedge surfaces permits a smooth, precise adjustment to less than 1/10 mm.
- Operation can be via an open-ended spanner - hence ensuring enhanced safety and ease of handling due to the large adjusting forces.
- The double wedge effect produces a precise vertical movement with no lateral slide.
- The flat design of the precision height wedge enables higher safety properties to be realised when aligning heavy and large components.
- The precision whipstock has an additional centring hole in the floor of the base surface for alignment on the machine table. (suitable for a pin ISO 8734 - 12 mm diameter)
Note:
- Suitable caps for the precision whipstock are nos. 6440, 6441 and 6442
- Height adjustment is 0.71 mm / revolution
Advantage:
Precision whipstock can be adjusted under load.
-
dimensions table
Order
no.B1 B2 TR H1 H2 H3 H4 L L1 L2 L3 375592 60 80 20 60-65 47,5 10 13 128 150-179 60 71 375618 100 140 30 87-95 74,0 15 15 204 242-287 81 102