Pull-stud size 5 for M6 engagement screw
No. 6370ZN-5
- Login
- |
-
- |
Installation clamping module, screw-in version
Pneumatic opening.
Opening operating pressure: min. 8 bar - max. 12 bar.
Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar.
Cover and piston hardened.
Repeatability < 0.005 mm.
| Order no. |
Size |
Pull-in/locking force up to
[kN] |
Holding force*
[kN] |
Blow out |
Weight
[g] |
CAD | SC |
|---|---|---|---|---|---|---|---|
| 563900 | KP5 | 1,5 | 13 | ● | 150 |
|
Application:
Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining. With small space requirement and low installation height.
Note:
The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and locked mechanically through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free). The contact surface is the upper surface of the housing. It is recommended to use the pneumatic pressure booster no. 6370ZVL.
The clamping module with blow-out has three connections: 1x pneum. Opening (1), 1x pneum. Retensioning (turbo) (2), 1x pneum. Blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
The suitable installation tool is available under the AMF order no. 41046.
* Please observe the installation instructions.
On request:
- Installation diagrams
-
dimensions table
Order
no.Size dia. D
dia. DN
dia. D1 H HA dia. LK
T 563900 KP5 M45 x 1 15 39 19,8 5,8 36 14