Set screw, ball-shaped
No. 6940
- Login
- |
-
- |
Support Element, base-flange-mounting
Normally retracted. Hydraulic advanced. Spring force for contact,
max. operating pressure 350 bar,
min. operating pressure 50 bar.
| Order no. |
Article no. |
Contact force F1
[N] |
Support force at 350 bar
[kN] |
Stroke C
[mm] |
Q max.
[l/min] |
Vol.
[cm³] |
Weight
[g] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|---|
| 66746 | 6964H-11-2 | 13,5-44,5 | 11 | 6,5 | 2,13 | 3,0 | 845 |
|
|
| 325878 | 6964H-17-3 | 26,5 - 53,5 | 17 | 12,5 | 2,13 | 10,5 | 1920 |
|
Design:
Cylinder body from steel, hardened. Support pin with internal thread case hardened and ground. Wiper to protect against dirt and cooling water. Internal parts from stainless steel. Oil supply via threaded port.
Application:
The support element is used as an extra support to prevent sagging and vibration of a workpiece.
Features:
Element with high load capacity and low height. Hydraulic and spring: the plunger is normally retracted. When pressure is applied, the support pin advances with a weak spring-applied force to contact the workpiece. The spring force varies with the stroke. As the hydraulic pressure rises, the support plunger is hydraulically clamped. When the pressure is released, the support plunger returns to the retracted position. Very high repeatability ensures optimum production quality.
Note:
Support pin must be protected against the entry of dirt and splash water by fitting a set screw or plug. When placing into operation, ensure that all air is bled from the system. Failure to do so can cause destruction of the clamping element by the escaping diesel effect.
The supporting force should be matched to the clamping force in order to absorb machining forces.
The supporting force should always be at least twice as high as the clamping force.
-
dimensions table
Order
no.Article no. dia. A B D E F G SW SW1 J x depth
K L M P Q R S dia. T X Y Z ØAA BB dia. CC DD OR-1
O-ring
Order No.OR-2
O-ring
Order No.66746 6964H-11-2 20,5 82,5 34 31,5 9,0 M35x1,5 30 19 M12x6,5 41,5 5 30,2 58,5 24,0 G1/8 18,3 7,1 43,1 10,5 10,5 14,1 6,35 9,91 1,78 330803 335422 325878 6964H-17-3 38,0 82,5 40 25,0 12,5 M60x1,5 54 19 M12x6,5 73,0 5 52,4 81,0 36,5 G1/8 26,2 7,1 62,6 16,0 10,5 14,1 6,35 9,91 1,78 330803 335422