ESD clamping screw
With protective cap made of electrostatic conductive (dissipative) material.
For push-pull type toggle clamps, tempered, galvanised and passivated. Tensile strength class 8.8, with nut and removable protective cap.
| Order no. | Size | Screw DIN 933 | D | D1 | L | L3 |
Weight
[g] | CAD | EUR | SC |
|---|---|---|---|---|---|---|---|---|---|---|
| 562602 | 0+1 | M4 x 20 | 11,0 | 7 | 27 | 12 - 20 | 4 |
|
7,70
|
|
| 562603 | 2 | M6 x 25 | 15,0 | 10 | 35 | 17 - 25 | 15 |
|
7,80
|
|
| 562604 | 3 | M8 x 35 | 19,0 | 13 | 48 | 22 - 35 | 26 |
|
8,20
|
Application:
The ESD clamping screw has been specially developed for use in ESD protection zones (EPA – electrostatic protected area) for working on electrostatically sensitive components, assemblies or devices in accordance with the standard DIN EN 61340-5-1.
Features:
- Leakage resistance according to DIN IEC/TR 61340-5-2 between 10⁰⁴ and 10⁰⁹ Ohm
- Discharge time according to DIN IEC/TR 61340-5-2 < 2 Sekunden
- Surface tension (electric field strength) according to DIN EN 61340-5-1 < 100 Volt
Note:
The ESD clamping screw is non-insulating. It must not be used in areas where open voltages are used.