Installation clamping module with indexing
No. 6370EAILA
- Login
- |
-
- |
Installation clamping module
Pneumatic opening.
Pneumatic blow-out.
Opening operating pressure: min. 8 bar - max. 12 bar.
Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar.
Cover and piston hardened.
Repeatability < 0.005 mm.
| Order no. |
Size |
Pull-in/locking force up to
[kN] |
Holding force*
[kN] |
Blow out |
Weight
[Kg] |
CAD | SC |
|---|---|---|---|---|---|---|---|
| 305375 | KP10 | 8 | 25 | ● | 0,45 |
|
|
| 303016 | KP20 | 17 | 55 | ● | 1,40 |
|
|
| 303057 | KP40 | 30 | 105 | ● | 3,40 |
|
Application:
Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining.
Note:
The installation clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and locked mechanically through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free). Use of the pneumatic pressure booster no. 6370ZVL is recommended.
The clamping module with blow-out and support control has three connections:
1x pneum. Opening (1) / 1x pneum. Retensioning (turbo) (2), 1x pneum. Blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
* Please observe the installation instructions.
On request:
- Installation diagrams
-
dimensions table
Order
no.Size dia. D
dia. DN
dia. D1 H HA dia. LK
M T 305375 KP10 78 22 50 30 7 60 M5 23 303016 KP20 112 32 78 44 10 88 M6 34 303057 KP40 148 40 102 57 15 118 M8 42