Clamping flange, Set
No. 6370ZB
- Login
- |
-
- |
Surface-mounted clamping module
Pneumatic opening.
Pneumatic blow-out.
Opening operating pressure: min. 8 bar - max. 12 bar.
Retensioning operating pressure (turbo): min. 5 bar - max. 6 bar.
Cover and piston hardened.
Repeatability < 0.005 mm.
| Order no. |
Size |
Pull-in/locking force up to
[kN] |
Holding force*
[kN] |
Blow out |
Weight
[Kg] |
CAD | SC |
|---|---|---|---|---|---|---|---|
| 305193 | KP10 | 8 | 25 | ● | 0,9 |
|
|
| 302851 | KP20 | 17 | 55 | ● | 2,6 |
|
|
| 302893 | KP40 | 30 | 105 | ● | 6,6 |
|
Application:
Zero-point clamping system in combination with hook clamping flange 63707B for set-up-time-optimised clamping during cutting and non-cutting machining.
Note:
The surface-mounted clamping module has high holding, pull-in and locking forces. This is opened pneumatically (1) and mechanically locked through spring force. To achieve the specified pull-in and locking forces, it must be briefly retensioned pneumatically (turbo) (2). Subsequent uncoupling of the pressure lines is possible at all times (module is tensioned pressure-free).
Use of the pneumatic pressure booster 6370ZVL is recommended.
The clamping module with blow-out and support control has three connections:
1x pneum. opening (1) / 1x pneum. retensioning (turbo) (2), 1x pneum. blow-out and support control (3). (The pneumatic blow-out and support control can optionally be connected.)
* Please observe the installation instructions.
On request:
- Individual housing
-
dimensions table
Order
no.Size dia. D
dia. DB dia. DN
HA K R 305193 KP10 78 77,5 22 32 16,50 G1/8 302851 KP20 112 110,0 32 50 28,25 G1/4 302893 KP40 148 146,0 40 62 32,50 G1/4