Pull-stud size 10 for M8 engagement screw
No. 6370ZN-10
- Login
- |
-
- |
Clamping module, flange version, with indexing
Pneumatic opening.
Pneumatic blow-out.
Operating pressure for opening: min. 5 bar - max. 12 bar.
Cover and piston hardened.
Flange housing: stainless steel.
Repetition accuracy < 0.005 mm.
| Order no. |
Size | Module installed |
Pull-in/locking force up to
[kN] |
Holding force*
[kN] |
Blow out |
Weight
[Kg] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|
| 568992 | KP10.3 | 6206ILA-10 | 10 | 25 | ● | 3,4 | - |
Application:
Zero-point clamping system for set-up-time-optimised clamping during cutting and non-cutting machining. The pneumatic supply lines can be connected to the side or base using M5 threads. Moreover, the air can be supplied via the floor using the O-rings supplied as standard. The clamping module can be mounted on a plate using the 6210-15-01 centring sleeve or recessed at 3 different depths.
The indexing notches prevent the interchangeable pallet from twisting, enabling exact positioning every 90°.
Note:
Support control: static pressure with supported interchangeable pallet, flow-through when no interchangeable pallet is in place.
The installation clamping module is opened pneumatically (1) and locked mechanically by spring force.
Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure).
The flange has three useable connections:
1 = Pneum. Opening
3 = Pneum. blow-out and pneum. support control
5 = Vent
* Please observe the installation instructions.
On request:
- Installation drawing
-
dimensions table
Order
no.Size dia. D
dia. D1 dia. D2
ØD3 H7 dia. DN
H1 H2 H3 H4 HA K K1 K2 dia. LK
M T 568992 KP10.3 112 111 112 15 22 5 16,5 32 40 50 8 22 27 88 M6 5