Pull-stud size 10 for M8 engagement screw
No. 6370ZN-10
- Login
- |
-
- |
Clamping module, flange version
Pneumatic opening.
Pneumatic blow-out.
Operating pressure for opening: min. 5 bar - max. 12 bar.
Cover and piston hardened.
Flange housing: stainless steel.
Repetition accuracy < 0.005 mm.
With locking control (pneum.), opening control (pneum.), support control (pneum.) and pull-stud sensing (pneum.).
| Order no. |
Size | Module installed |
Pull-in/locking force up to
[kN] |
Holding force*
[kN] |
Blow out |
Weight
[Kg] |
CAD | SC |
|---|---|---|---|---|---|---|---|---|
| 564600 | KP10.3 | 6108LA-10-09 | 10 | 25 | ● | 3,4 | - |
Application:
Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining. The pneumatic supply lines can be connected to the side or base using M5 threads. Moreover, the air can be supplied via the floor using the O-rings supplied as standard. The clamping module can be mounted on a plate using the 6210-15-01 centring sleeve or recessed at 3 different depths.
Note:
Locking control: Dynamic pressure with locked clamping modules, flow-through with opened clamping module.
Opening control: Dynamic pressure with opened clamping modules, flow-through with locked clamping module.
Pull-stud sensing: Dynamic pressure with pull-stud present, flow-through if pull-stud is not present.
Support control: static pressure with supported interchangeable pallet, flow-through when no interchangeable pallet is in place.
The installation clamping module is opened pneumatically (1) and locked mechanically by spring force.
Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure).
The flange has six useable connections:
1 = Pneum. Opening
3 = Pneum. blow-out and pneum. support control
4= Pneum. opening control
5 = Vent
6 = Pneum. pull-stud sensing
8= Pneum. locking control
* Please observe the installation instructions.
On request:
- Installation drawing
-
dimensions table
Order
no.Size dia. D
dia. D1 dia. D2
ØD3 H7 dia. DN
H1 H2 H3 H4 HA K1 K2 dia. LK
M 564600 KP10.3 112 111 112 15 22 5 16,5 32 40 50 22 27 88 M6