Pull-stud size 20 for M10 and M12 engagement screw
No. 6370ZN-20
- Login
- |
-
- |
Installation clamping module with central lock for automation solutions
Hydraulic opening.
Pneumatic blow-out.
Operating pressure: 60 bar - 70 bar.
Cover and piston hardened.
Repetition accuracy < 0.005 mm.
With opening control (pneum.) and
support control (pneum.).
| Order no. |
Size |
Pull-in/locking force up to
[kN] |
Holding force*
[kN] |
Blow out |
Weight
[Kg] |
CAD | SC |
|---|---|---|---|---|---|---|---|
| 550279 | KH20 | 20 | 55 | ● | 1,4 |
|
Design:
With central lock, blow-out, support control and opening control.
Application:
Zero-point clamping system for automation solutions for set-up-time-optimised clamping during cutting and non-cutting machining.
Note:
Central lock with pneum. cleaning function of support surfaces.
Fastening and installation of the pull-stud by means of ISO 10642 countersunk head screw M12 12.9.
Opening control: Dynamic pressure with opened clamping module, flow-through with locked clamping module.
Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet.
The installation clamping module is opened hydraulically and mechanically locked through spring force. Subsequent uncoupling of the pressure line is possible at any time (module is clamped at normal pressure).
The clamping module has four connections:
1 = Hydr. opening
3 = Pneum. blow-out and support control
4 = Pneum. Opening control inlet
5 = Pneum. Opening control outlet
* Please observe the installation instructions.
-
dimensions table
Order
no.Size dia. D
dia. DN
dia. D1 H HA dia. LK
M T 550279 KH20 112 32 78 44 10 88 M6 34